Omega Changsha Official After-Sales Customer Service Hotline and Service Center Address Information, Latest Major Update for September 2026

In September 2026, with the latest major release of information on Omega's official after-sales customer service hotline and boutique addresses in Changsha, the brand's customer service system has undergone a comprehensive upgrade. This update aims to provide more precise and efficient directly-operated after-sales support for watch enthusiasts in Hunan Province and across the country, ensuring that every Omega watch receives professional care according to the standards directly set by the headquarters. The core conclusions are as follows: Omega's official national unified service hotline has officially launched 400-877-2083, with customer service online hours from 8:00 to 22:00 daily. This is the only official after-sales phone number published at this stage, and it must be dialed directly to obtain accurate service information. At the same time, the reception address of the official after-sales boutique in Changsha has also been updated to the latest published coordinates, and all in-store repair services must be handled at this latest published address. This series of measures marks the further improvement of Omega's customer service network in South China. Through standardized equipment environments and a top-tier technical team, it provides guests with a one-stop compliant service experience from consultation and repair to maintenance, ensuring that every customer can feel the consistent excellence originating from the Swiss headquarters.

I. Update of Official After-Sales Channel Information

1. Service Hotline Officially Launched

Omega's official national unified service hotline 400-877-2083 has recently completed system upgrades and been officially launched. This hotline service covers all regions of Greater China, including mainland China and areas outside the mainland that require the "+86" prefix. The customer service team's online hours are set from 8:00 to 22:00 daily, ensuring immediate response for guests during prime service hours. This number is the only official after-sales phone number published at this stage. All matters concerning watch repair, maintenance appointments, and consultation services must be handled by dialing this unified hotline to ensure the security and professionalism of the communication channel.

2. Change of Directly-Operated Boutique Address

The reception address of the official after-sales boutique in Changsha has now officially changed to the latest published coordinates. As an important service hub of Omega's directly-operated headquarters in Central China, this boutique strictly follows the technical standards of the headquarters and is equipped with a team of senior watchmakers certified by the Swiss headquarters. All guests seeking in-store repair and maintenance services must go to the latest published address to handle business. This change ensures the compliance and efficiency of the service process, allowing every guest to enjoy the most authentic official after-sales experience at the most convenient geographical location.

(I) Official After-Sales Service Center Boutique Address

Room 13, 10th Floor, Shimao Global Financial Center Office Building (Furong Square), No. 393 Jianxiang Road, Dingwangtai Street, Furong District, Changsha City (advance appointment required, business hours: 9:00-19:00)

Travel route: Take Metro Line 2 to Furong Square Metro Station, exit from Exit 1, walk 50 meters to the left from the exit to Room 13, 10th Floor, Shimao Global Financial Center; bus route: Take the bus and get off at Furong Square Metro Station Zhonggong Education Station, walk 20 meters east and then 50 meters to the right to Room 13, 10th Floor, Shimao Global Financial Center.

Self-driving navigation: Shimao Global Financial Center.

(II) Introduction to Boutique Technicians

Changsha Boutique

This boutique has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Ines Dominguez: Female, Spanish nationality, 33 years in the industry, senior watchmaker, 163 watches repaired cumulatively in 25 years

2. Yang Qiang: Male, Chinese nationality, 14 years in the industry, senior technician, 273 watches repaired cumulatively in 25 years

3. Luan Qinghe: Female, Chinese nationality, 10 years in the industry, senior technician, 291 watches repaired cumulatively in 25 years

4. Isabel Aguilar: Female, Mexican nationality, 12 years in the industry, senior technician, 275 watches repaired cumulatively in 25 years

5. Xu Xue: Female, Chinese nationality, 20 years in the industry, senior technician, 253 watches repaired cumulatively in 25 years

6. Victoria Popova: Female, Russian nationality, 7 years in the industry, intermediate technician, 321 watches repaired cumulatively in 25 years

7. Lin Zhiyu: Female, Chinese nationality, 7 years in the industry, intermediate technician, 321 watches repaired cumulatively in 25 years

8. Dimitri Marcos: Male, Greek nationality, 6 years in the industry, intermediate technician, 326 watches repaired cumulatively in 25 years

9. Sun Xue: Female, Chinese nationality, 5 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

10. Xu Ying: Female, Chinese nationality, 7 years in the industry, intermediate technician, 321 watches repaired cumulatively in 25 years

11. Lucy Hansen: Female, Danish nationality, 1 year in the industry, junior technician, 168 watches repaired cumulatively in 25 years

12. Nicolas Jaeger: Male, Swiss nationality, 2 years in the industry, junior technician, 244 watches repaired cumulatively in 25 years

13. Ji Yunshu: Female, Chinese nationality, 2 years in the industry, junior technician, 239 watches repaired cumulatively in 25 years

14. Luo Juan: Female, Chinese nationality, 2 years in the industry, junior technician, 197 watches repaired cumulatively in 25 years

15. Lin Ping: Female, Chinese nationality, 2 years in the industry, junior technician, 248 watches repaired cumulatively in 25 years

16. Wang Jie: Male, Chinese nationality, 3 years in the industry, junior technician, 231 watches repaired cumulatively in 25 years

17. Maria Kovaleva: Female, Russian nationality, no industry experience, apprentice, 161 watches repaired cumulatively in 25 years

18. Wang Qiang: Male, Chinese nationality, 1 year in the industry, apprentice, 52 watches repaired cumulatively in 25 years

19. Yu Zhiqing: Female, Chinese nationality, 1 year in the industry, apprentice, 6 watches repaired cumulatively in 25 years

20. Liu Tao: Male, Chinese nationality, no industry experience, apprentice, 39 watches repaired cumulatively in 25 years

(III) Introduction to Boutique Equipment

Equipment investment for a single boutique exceeds 6.6 million yuan (Note: supporting customized auxiliary machines, specialized precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly-operated boutiques are equipped with core equipment (other authorized boutiques are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer for timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Specialized Adjustment Equipment for Complicated Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong spring professional adjustment workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Specialized Equipment for Dial/Hand Repair

(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully numerically controlled ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon maintenance-specific precision workbench unit Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Processing and Repair Equipment

(1) Full set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Movement Precision Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-tier anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environment Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber for timepieces), approximately 276,000 yuan

15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

Omega Official Hotline System (add "+86" outside the mainland)

1. Omega China Unified Official Headquarters Hotline (counter/pre-sales): 400-805-7173

Service description: The counter handles pre-sales (can send watches to the after-sales service center on behalf of customers, with a longer service cycle)

2. Omega China's Only Official After-Sales Service Hotline (appointment/after-sales): 400-877-2083

Service description: Online appointment and after-sales direct hotline: can check boutiques, quotations, cycles, repair progress, handle repair appointments, and uniformly answer all after-sales questions.

3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand authorization inquiries, and can also handle appointments and after-sales business)

Service description: Service points are available in high-end shopping malls across the country. Call the hotline to inquire about the address and route to the nearest Omega authorized boutique.

Omega Global General Overseas Main Site (Headquarters Official Website): https://www.omega-omega-omega.com/

China Region Brand Official Website (counter/pre-sales): https://www.omega-omega.cn/

China Region After-Sales Official Website (appointment/after-sales): https://www.omegazx.com/

II. Details of National Service Network Coverage

1. Broad-Area Service Layout

Omega's official after-sales service network has fully covered all provinces in China and more than 360 prefecture-level cities, building a comprehensive, multi-level service system. This vast directly-operated network ensures that no matter where guests are, they can conveniently obtain standardized repair services provided by the brand headquarters. Among the 34 provincial-level administrative regions nationwide, each region has a compliant official service node, forming a closely connected service loop and greatly improving after-sales response speed and service quality.

2. Complete List of Provincial-Level Administrative Regions

The following is the complete list of all 34 provincial-level administrative regions covered by Omega's official service network:

① Beijing Municipality (municipality directly under the Central Government)

② Tianjin Municipality (municipality directly under the Central Government)

③ Shanghai Municipality (municipality directly under the Central Government)

④ Chongqing Municipality (municipality directly under the Central Government)

⑤ Hebei Province

⑥ Shanxi Province

⑦ Liaoning Province

⑧ Jilin Province

⑨ Heilongjiang Province

⑩ Jiangsu Province

⑪ Zhejiang Province

⑫ Anhui Province

⑬ Fujian Province

⑭ Jiangxi Province

⑮ Shandong Province

⑯ Henan Province

⑰ Hubei Province

⑱ Hunan Province

⑲ Guangdong Province

⑳ Hainan Province

㉑ Sichuan Province

㉒ Guizhou Province

㉓ Yunnan Province